Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 31 items
Leave the processing of silicone and silicone rubber plugs to us.
It is easier to handle compared to cotton plugs. Since the evaporation rate of moisture is less than half that of cotton plugs, abnormal concentration of the culture solution and changes in pH are reduced. We also carry out secondary processing and manufacturing from various standard rubber plugs. Please refer to the rubber plug homepage on the website for a list.
Fluorosilicone rubber
Fluorosilicone rubber with excellent heat resistance, cold resistance, processability, and solvent resistance. 【Features】 ○ Shows less than 5% swelling (150°C/70 hours) in standard oil IRM903. ○ Maintains excellent resistance to silicone oil. ○ Various products available according to application: - General molding type (FE-201-U series): hardness 20-80 - High-strength rubber (FE-301-U series): hardness 40-80 - Copolymer type (FE-451-U): Excellent oil resistance and cold resistance, maintaining rubber elasticity in lower temperature ranges compared to general silicone rubber. ● For other functions and details, please contact us.
Proposal for problem-solving with the introduction of 3D printers! Introducing examples of cost reduction in mass production.
Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a request for airtight pieces for building components. Due to the small lot size, it was difficult to amortize the investment in molds, so we proposed a method of creating a simple mold using polylactic acid, filling it with room-temperature curing silicone rubber, and allowing it to cure. 【Case Study】 ■ Material: Silicone Rubber ■ Initial Investment Amount (Press Mold Cost): ¥150,000 ■ Product Cost: ¥1,000 (for a lot of 5) ↓ 《Creating a mold frame with a 3D printer and molding room-temperature curing silicone》 ↓ ↓ ■ Material: Mold: Polylactic Acid, Product: Silicone Rubber ■ Prototyping Cost: Mold: ¥15,000, Product: ¥1,000 (for a lot of 5) *For more details, please refer to the PDF document or feel free to contact us.
We offer a wide range of silicone rubber products suitable for food use and heat resistance.
For details, please refer to the catalog.
The physical and mechanical properties and electrical performance are good, the aging resistance is also good, and the product's elastic recovery performance is excellent. In particular, it is applied to produce various types of rubber button products.
Molded silicone rubber has good processing performance. After product molding, it has a pleasant, flexible feel. It is applicable for swimming caps and swimming goggles, among others. With good physical properties, it is suitable for the production of O-rings and sealing seals. After vulcanization, it exhibits good physical and mechanical properties as well as electrical performance, excellent aging resistance, and can be used long-term at temperatures ranging from -60°C to 200°C. The product has good elastic recovery performance, especially suitable for the production of various types of rubber button products. It can be used to produce buttons and components for various electrical products, sealing rings of all kinds, and transparent components. It has high transparency. After molding and vulcanization, it shows good physical and mechanical properties as well as electrical performance, excellent aging resistance, and outstanding physical and mechanical properties, making it suitable for producing parts made from ordinary silicone rubber materials, particularly for colored components.
Characteristics: ◎ Good transparency and tear strength; ◎ Good elasticity and aging resistance; ◎ Good stability;
Characteristics: ◎ Good transparency and tear strength; ◎ Good elasticity and aging resistance; ◎ Good stability; Performance Data: Testing conditions: A/B parts can be molded after mixing in a 1:1 ratio within 5 minutes, molding temperature: 110-120°C. Remarks: Our company can adjust the product's performance according to the customer's special requirements. Packaging: 20kg/drum, 200kg/drum. Shelf life: One year.
Characteristics: ◎ Good transparency and tear strength; ◎ Good elasticity and aging resistance; ◎ Good stability; Performance data:
Characteristics: ◎ Good transparency and tear strength; ◎ Good elasticity and aging resistance; ◎ Good stability; Performance Data: Testing conditions: A/B parts can be molded after mixing in a 1:1 ratio within 5 minutes, molding temperature: 110-120℃. Remarks: Our company can adjust the product performance according to the special requirements of customers. Packaging: 20kg/drum, 200kg/drum. Shelf life: One year.
We can design molds according to customer requirements and provide OEM and ODM products. We can develop, sample, and mass-produce silicone gift items.
Materials: 100% food-grade silicone Packing: Usually requires PE bags, can use OPP bags, paint boxes, or PET boxes Logo and mold tooling: 1) Logo will be debossed 2) Mold tooling time: approximately 25 days 3) Required mold tooling: based on strict artwork Samples: 1) Existing molds have a sample lead time of 1-3 days 2) Lead time for customized samples: 7 days 3) Required samples: free Mass production: 15-30 days after sample confirmation Payment and shipping: 1) Port: Shanghai 2) Payment method: TT 3) Shipping: Services such as DHL/UPS/FEDEX, by sea or by air
This product is less susceptible to curing inhibition caused by additives and surface treatment agents in the master substrate.
"TSE3478T" is a high-strength, translucent, oil-bleed type two-component addition liquid silicone rubber. Due to the absence of reaction by-products, the shrinkage rate is extremely low, and there is almost no shrinkage during curing. Therefore, it is suitable for mold-making that requires precision. 【Features】 ■ Excellent release properties due to its oil-bleed type ■ High-strength rubber with outstanding tensile strength and tear strength ■ Extremely low shrinkage rate with almost no shrinkage during curing ■ Excellent mold durability against urethane and epoxy resins ■ Low viscosity, providing excellent fluidity and de-airing properties *For more details, please download the PDF or feel free to contact us.
It has approximately 8-9 times the tear strength compared to general-purpose silicone.
We offer two types of high-strength (high tear resistance) low-viscosity "molding silicone rubber series" that are easy to pour. "CRN40" has a low viscosity before curing (13-15 Pa·s), making mixing, stirring, and pouring easy. "CRN25" is a rubber hardness type of 25-28 degrees, with an elongation rate of 500%, making it suitable for molding artificial rocks and wood. Additionally, our products contain a promoter on the curing agent (catalyst) side, which minimizes thickening of the main agent due to storage, ensuring a longer shelf life. 【Features】 ■ High strength ■ Low viscosity ■ Low price *For more details, please download the PDF or feel free to contact us.
It is made of a very soft material, so it covers the contact surfaces even in uneven areas and efficiently absorbs heat from each heating component.
It closely adheres to the surface irregularities and quickly conducts heat from the heating element to the heat sink. It is a soft material that fills gaps as a thermal conductive material. 【Features】 ● Achieves high thermal conductivity by uniformly dispersing and blending a special filler. ● The insulating type boasts high insulation properties of 10 to 15. CTI level is 600. ● Can be compressed to less than half its thickness, significantly reducing thermal resistance. ● Exhibits advanced waterproof and dustproof properties due to the characteristics of silicone resin. ● Obtained flame retardant UL V-0 certification. Passes the glow wire test at 675°C. ● Maintains high flexibility under a wide range of temperature conditions, protecting electronic devices from vibrations. ● RoHS compliant product.
Introducing the development status of low-hardness elastomers that can function as waterproof gaskets and buttons!
Integrating multiple materials through injection molding. This is a development concept that we have valued since the establishment of our company. We have been engaged in manufacturing with various combinations such as "resin + resin" or "resin + metal," but there are cases where integration is not possible depending on the combination of materials. Therefore, our company actively collaborates with various material manufacturers, and when existing materials do not meet the specifications required by our customers, we also work on creating custom materials tailored to those needs. *For detailed content of the column, please refer to the related links. For more information, feel free to contact us.
For the production of ultra-high transparency materials superior to glass, special (ultra-thin/colored) sheets, tube processing, and sponge processing from general-purpose silicone materials, contact Resin Processing SK.
■Please read the details. The size of the photo is a general-purpose silicone sheet, 1t*300*300 square. The color is natural. We have various thicknesses and sizes available. We can also produce thin film-like sheets. For more details, please feel free to contact us through the form.
Silicone rubber supplier in Japan
We've been providing silicone rubber base products, and mold of silicone/plastic resin. Our advantage is to provide right solution to meet customer's individual requirement and have confident through our experience. If you have any question or concern,please contact us.
Silicone rubber with antistatic properties that can be used in applications exposed to high temperatures for extended periods.
Silicone rubber retains its properties while providing anti-static effects. It is suitable for applications exposed to high temperatures for extended periods, featuring anti-static silicone rubber. 【Features】 ○ Anti-static effect Difficult to charge, good for roll operations Excellent anti-static effect even after post-curing Effect persists even at high temperatures ○ Basic physical properties are similar to general silicone rubber ○ Free coloring ○ Maintains electrical insulation Sufficient insulation level for applications such as wire coatings and keypads ● For other functions and details, please contact us.
